The aim of this study was to show the influence of locational states of submicron fibers added into epoxy matrix on mechanical properties of modified plane-woven carbon fiber reinforced plastic (CFRP). To change the locational states of submicron fibers, two kinds of fabrication processes were applied in preparing specimen by hand lay-up method. Submicron fibers were simply added into epoxy resin with ethanol after they were stirred by a dispersion process using homogenizer to be located far from the interface between reinforcement and matrix. In contrast, submicron fibers were attached onto the carbon fibers by injecting from a spray nozzle accompanying with ethanol to be located near the interface, after they were tentatively contained in ethanol. The plain-woven CFRP plates were fabricated by hand lay-up method and cured at 80 degree-C for 1 hour and then at 150 degree-C for 3 hours. After curing, the plain-woven CFRP plates were cut into the dimension of specimen. Tensile shear strength and Mode-II fracture toughness of CFRP were determined by tensile lap-shear test and End-notched flexure(ENF) test, respectively. When submicron fibers were located far from the interface between carbon fibers and epoxy resin, tensile shear strength and Mode-II fracture toughness of CFRP were improved 30% and 18% compared with those of unmodified case. The improvement ratio in modified case was rather low (about few percentages) in the case where submicron fibers were located near the interface. The result suggested that crack propagation should be prevented when submicron fibers were existed far from the interface due to the effective stress state around the crack tip.
@article{bwmeta1.element.doi-10_1515_cls-2016-0008,
author = {Soichiro Kumamoto and Kazuya Okubo and Toru Fujii},
title = {Influence of locational states of submicron fibers added into matrix on mechanical properties of plain-woven Carbon Fiber Composite},
journal = {Curved and Layered Structures},
volume = {3},
year = {2016},
language = {en},
url = {http://dml.mathdoc.fr/item/bwmeta1.element.doi-10_1515_cls-2016-0008}
}
Soichiro Kumamoto; Kazuya Okubo; Toru Fujii. Influence of locational states of submicron fibers added into matrix on mechanical properties of plain-woven Carbon Fiber Composite. Curved and Layered Structures, Tome 3 (2016) . http://gdmltest.u-ga.fr/item/bwmeta1.element.doi-10_1515_cls-2016-0008/