Hybrid switching controller design for the maneuvering and transit of a training ship

Mirosław Tomera

International Journal of Applied Mathematics and Computer Science, Tome 27 (2017), p. 63-77 / Harvested from The Polish Digital Mathematics Library

Résumé

The paper presents the design of a hybrid controller used to control the movement of a ship in different operating modes, thereby improving the performance of basic maneuvers. This task requires integrating several operating modes, such as maneuvering the ship at low speeds, steering the ship at different speeds in the course or along the trajectory, and stopping the ship on the route. These modes are executed by five component controllers switched on and off by the supervisor depending on the type of operation performed. The desired route, containing the coordinates of waypoints and tasks performed along consecutive segments of the reference trajectory, is obtained by the supervisory system from the system operator. The former supports switching between component controllers and provides them with new set-points after each change in the reference trajectory segment, thereby ensuring stable operation of the entire hybrid switching controller. The study also presents designs of all controller components, which are done using a complex mathematical model of the selected ship, after its simplification depending on the type of controller. The developed control system was tested on the training ship Blue Lady and used to train captains at the Ship Handling Research and Training Center near Iława in Poland. The conducted research involved an automatic movement of the ship from one port to another. The performed transit route required the ship to leave the port, pass the water area, and berth at the port of destination. The study revealed good quality of the designed hybrid controller.

Détail

Publié le : 2017-01-01
EUDML-ID : urn:eudml:doc:288089

Bibliographie

[000] Antsaklis, P.J. and Nerode, A. (1989). Hybrid control systems: An introductory discussion to the special issue, IEEE Transactions on Automatic Control 43(4): 457-460, DOI: 10.1109/TAC.1998.664148.

[001] Balbis, L., Ordys, A., Grimble, M. and Pang, Y. (2007). Tutorial introduction to the modelling and control of hybrid systems, International Journal of Modelling, Identification and Control 2(4): 259-272, DOI: 10.1504/IJMIC.2007.016409.

[002] Bańka, S., Brasel, M., Dworak, P. and Jaroszewski, K. (2015). A comparative and experimental study on gradient and genetic optimization algorithms for parameter identification of linear MIMO models of a drilling vessel, International Journal of Applied Mathematics and Computer Science 25(4): 877-893, DOI: 10.1515/amcs-2015-0063. | Zbl 1347.93093

[003] Breivik, M., Hovstein, V.E. and Fossen, T.I. (2008). Straight-line target tracking for unmanned surface vehicles, Modeling, Identification and Control 29(4): 131-149, DOI: 10.4173/mic.2008.4.2.

[004] Brodtkorb, A.H., Sorensen A.J. and Teel, A.R. (2014). Increasing the operation window of dynamic positioned vessels using the concept of hybrid control, Proceedings of the 33rd International Conference on Ocean, Offshore and Arctic Engineering, San Francisco, CA, USA.

[005] Brown, R.G. and Hwang, P.Y.C. (2012). Introduction to Random Signals and Applied Kalman Filtering with Matlab Exercises, John Wiley & Sons, New York, NY. | Zbl 0868.93002

[006] Davidson, K.S.M. and Schiff, L.I., (1946). Turning and course keeping qualities, Transactions of the Society of Naval Architects Marine Engineers 54: 152-190.

[007] Fossen, T.I. (2011). Handbook of Marine Craft Hydrodynamics and Motion Control, John Wiley & Sons, Chichester.

[008] Gelb, A. (1974). Applied Optimal Estimation, MIT Press, Cambridge, MA.

[009] Gierusz, W. (2001). Simulation model of the shiphandling training boat Blue Lady, Proceedings of the 5th IFAC Conference on Control Application in Marine Systems (CAMS), Glasgow, UK.

[010] Godhavn, J.M., Lauvdal, T. and Egeland, O. (1996). Hybrid control in sea traffic management systems, in R. Alur et al. (Eds.), Hybrid Systems III, Springer, New York, NY, pp. 149-160.

[011] Goedel, R., Sanfelice, R.G. and Teel, A.R. (2012). Hybrid Dynamical Systems: Modeling Stability, and Robustness, Princeton University Press, Princeton, NJ. | Zbl 1241.93002

[012] Hespanha, J.P. (2001). Tutorial on supervisory control, 40th IEEE Conference on Decision and Control, Orlando, FL, USA.

[013] Holzhüter, T. (1990). A high precision track controller for ships, Proceedings of the 11th IFAC World Congress, Tallin, Estonia, pp. 118-123.

[014] Iława (2016). Ship Handling Research and Training Centre, Iława, Poland, http://www.ilawashiphandling.com.pl.

[015] Kamgarpour, M., Soler, M., Tomlin, C., Olivares, A. and Lygeros, J. (2011). Hybrid optimal control for aircraft trajectory design with a variable sequence of modes, Preprints of the 18th IFAC World Congress, Milan, Italy, pp. 7238-7243.

[016] Kurt, A. and Özgüner, Ü. (2013). Hierarchical finite state machines for autonomous mobile systems, Control Engineering Practice 21(2): 184-194, DOI: 10.1016/j.conengprac.2012.09.020.

[017] Lisowski, J. (2013). Sensitivity of computer support game algorithms of safe ship control, International Journal of Applied Mathematics and Computer Science 23(2): 439-446, DOI: 10.2478/amcs-2013-0033. | Zbl 1342.91008

[018] Lygeros, J., Godbole, D.N. and Sastry, S. (1996). Verified hybrid controllers for automated vehicles, IEEE Transactions on Automatic Control 43(4): 522-539, DOI: 10.1109/9.664155. | Zbl 0904.90057

[019] Nguyen, T.D., Sorensen, A.J. and Quek, S.T. (2007). Design of hybrid controller for dynamic positioning from calm to extreme sea conditions, Automatica 43(5): 768-785, DOI: 10.1016/j.automatica.2006.11.017. | Zbl 1117.93029

[020] Nguyen, T.D., Sorensen, A.J. and Quek, S.T. (2008). Multi-operational controller structure for station keeping and transit operations of marine vessels, IEEE Transactions on Control Systems Technology 16(3): 491-498, DOI: 10.1109/TCST.2007.906309.

[021] Nguyen, T. D. and Sorensen, A. J. (2009). Switching control for thruster-assisted position mooring, Control Enginering Practice 17(9): 985-994, DOI: 10.1016/j.conengprac.2009.03.001.

[022] Nomoto, K., Taguchi, T., Honda, K. and Hirano, S. (1957). On the steering qualities of ships: Technical Report, International Shipbuilding Progress 4(35): 354-370.

[023] Pomirski, J., Rak, A. and Gierusz, W. (2012). Control system for trials on material ship model, Polish Maritime Research 19(S1): 25-30.

[024] Pritchett, A.R., Lee, S.M. and Goldsman, D. (2001). Hybrid-system simulation for national airspace system safety analysis, Journal of Aircraft 38(5): 835-840, DOI: 10.2514/2.2868

[025] Salehi, R, Shahbakhti, M. and Hedrick, J.K. (2014). Real-time hybrid switching control of automotive cold start hydrocarbon emission, Journal of Dynamic Systems, Measurement, and Control 136(4): 041002-041002-10, DOI: 10.1115/1.4026534.

[026] Smogeli, O.N., Sorensen, A.J. and Fossen, T.I. (2004). Design of a hybrid power/torque thruster controller with thrust loss estimation, Proceedings of the IFAC Conference on Control Application in Marine Systems (CAMS), Ancona, Italy, pp. 409-414.

[027] Taghavipour, A., Azad, N.L. and McPhee, J. (2015). Real-time predictive control strategy for a plug-in hybrid electric powertrain, Mechatronics 29(8): 13-27, DOI: 10.1016/j.mechatronics.2015.04.020.

[028] Tomera, M. (2010). Discrete Kalman filter design for multivariable ship motion control: Experimental results with training ship, Joint Proceedings of Gdynia Martime University and Hochschule Bremerhaven: 26-34.

[029] Tomera, M. (2014). Dynamic positioning system for a ship on harbour manoeuvring with different observers: Experimental results, Polish Maritime Research 21(3): 3-24, DOI: 10.2478/pomr-2014-0025.

[030] Tomera, M. (2015). A multivariable low speed controller for a ship autopilot with experimental results, Proceedings of the 20th International Conference on Methods and Models in Automation and Robotics (MMAR), Międzyzdroje, Poland, pp. 17-22, DOI: 10.1109/MMAR.2015.7283699.

[031] Tutturen, S.A. and Skjetne, R. (2015). Hybrid control to improve transient response of integral action in dynamic positioning of marine vessels, IFAC-PapersOnLine 48(16): 166-171, DOI: 10.1016/j.ifacol.2015.10.275.

[032] Xiang, Z., Wang, R. and Chen, Q. (2010). Fault tolerant control of switched nonlinear systems with time delay under asynchronous switching, International Journal of Applied Mathematics and Computer Science 20(3): 497-506, DOI: 10.2478/v10006-010-0036-0. | Zbl 1211.93075

[033] Yang, H., Jiang, B., Cocquempot, V. and Lu, L. (2012). Supervisory fault tolerant control with integrated fault detection and isolation: A switched system approach, International Journal of Applied Mathematics and Computer Science 22(1): 87-97, DOI: 10.2478/v10006-012-0006-9. | Zbl 1273.93005

[034] Zhang, F., Zhai, Y., Liao, J. (2016). A new sufficient schedulability analysis for hybrid scheduling, International Journal of Applied Mathematics and Computer Science 26(3): 683-692, DOI: 10.1515/amcs-2016-0047. | Zbl 1347.90053